Kemppi MinarcMig 220 Amp MIG Welding Machine

Kemppi MinarcMig 220 Amp MIG Welding Machine

A 14.2 kg, portable MIG/MAG welding machine providing 220 A with a 20% duty cycle from a 16 A single-phase mains supply. Manual and synergic welding options available. Compatible with a wide range of materials, including steel (Fe), stainless steel (Ss), aluminum (Al), and CuSi brazing filler wires.  A 3-meter welding torch with an ergonomic gun handle, cable set, and carrying strap included. This model is specifically for the Australian market due to the different mains plug fitted and VRD active.

Features:

• Precise weld quality and arc ignition with adaptive regulation
• Just select material type and the plate thickness and weld in auto mode
• 220A / 190A MIG/MAG welding power from a 16A supply
• Automatic or manual model power regulation
• Compatible with Fe, Fe FCW, Ss, Al, CuSi filler wires, 1 kg, and 5 kg wire spools
• A large graphical backlit display guides you in low-light conditions
• Designed for use with long power extension cables (up to 100m)
• A 3-meter welding torch with an ergonomic gun handle, cable set, and carrying strap included. 
• Suitable for mains network or generator use

Specifications:

• Mains connection voltage: 230 V ±15 %
• Mains connection phases: 1~50/60 Hz
• Maximum supply current [I1max]: 30 A
• Effective supply current [I1eff]: 5 A
• Rated maximum input power [S1max]: 7 kVA
• Mains fuse: 15 A
• No-load voltage [U0]: 70 V - 75 V
• Open circuit voltage [Uav]: 70 V - 75 V
• Output, duty cycle % at rated max. current, MIG 20 %
• Output at +40 °C, rated max current, MIG 220 A
• Output at +40 °C, 60% MIG: 160 A
• Output at +40 °C, 100% MIG: 120 A
• Output range, MIG: 20 A / 15 V - 220 A / 28 V
• Voltage adjustment range, MIG: 10 V - 28 V
• Power factor at rated maximum current [λ] 0.99
• Efficiency at rated maximum current [η] 84 %
• EMC class: A
• Welding connection type: Built-in
• Wire feed mechanism: Single-motor, 2-roll
• Filler wire diameter:
  • Fe: 0.6 mm - 1 mm
  • Fe-MC/FC: 0.8 mm - 1 mm
  • Ss: 0.8 mm - 1 mm
  • Al: 1 mm
• Wire feed speed: 1 m/min - 14 m/min
• Maximum wire spool:
  • Weight: 5 kg
  • Diameter: 200 mm
• Maximum shielding gas pressure: 0.5 MPa
• Control panel, display: LCD
• Control panel, controls: 2 control knobs, Push buttons
• Control panel, type of installation: Built-in
• Operating temperature: -20 °C - 40 °C
• Storage temperature: -40 °C - 60 °C
• Degree of protection (fully installed): IP23
• Standards: IEC 60974-1, -5, -10, IEC 61000-3-12, AS 60974.1
• Dimensions (L x W x H): 450mm x 368mm x 227mm
• Weight: 16kg