15kg - 1.2mm Bohler FOXCORE 308L-T1 Flux Cored Stainless Steel MIG Wire

Bohler Welding – FOXCORE 308L-T1 FCAW - 1.2mm

Flux-cored wire, high-alloyed, austenitic stainless

Classification: E308LT1-4

Part No: BOH-E308LT1-4-1.2-57544

Rutile flux-cored wire of T 19 9 L P / E308LT1 type designed for welding 1.4307 / 304L type stainless steels with good corrosion resistance under moderately severe conditions, e.g. in oxidizing acids and cold or dilute reducing acids. Also suitable for welding steels that are stabilized with titanium or niobium, such as 1.4541 / 321, 1.4878 / 321H and 1.4550 / 347, but for service temperatures above 350°C, a niobium-stabilized wire such as FOXcore 347-T1 would be required. The scaling temperature is approximately 850°C in air. FOXcore 308L-T1 has a stronger arc and a faster freezing slag compared to FOXcore 308L-T0 DG. It is designed for all-round welding and can be used in all positions without changing the parameter settings. Very good slag detachability and almost no spatter formation. Due to the fast freezing rutile slag, the weldability is excellent also in the vertical up and overhead positions. The wide arc ensures even penetration and side-wall fusion to prevent lack of fusion. Suitable for service temperatures from –196°C to 350°C. For flat and horizontal welding positions, FOXcore 308L-T0 or FOXcore 308L-T0 DG may be preferred.

Base materials:

1.4301 X5CrNi18-10, 1.4306 X2CrNi19-11, 1.4307 X2CrNi18-9, 1.4311 X2CrNiN18-9, 1.4312 GX10CrNi18-8, 1.4541 X6CrNiTi18-10, 1.4546 X5CrNiNb18-10, 1.4550 X6CrNiNb18-10 UNS S30400, S30403, S30453, S32100, S34700 AISI 304, 304L, 304LN, 302, 321, 347