UNIMIG 165 VIPER Multi Synergic MIG/TIG/STICK Welder - U11006K

Get greater control over your welds with the VIPER MULTI 165. This multi-process MIG, TIG and STICK machine comes ready with synergic programs, as well as a number of settings — like Inductance — that gives you complete control over your arc.

Synergic MIG ControL - The clever Synergic MIG control takes the guesswork out of your settings. Simply select your wire size and wire type,
and adjust your amperage to suit your work piece. The program works with mild steel, stainless steel, flux-cored and aluminium wires.

Gas & Gasless MIG - This machine supports both gas-shielded MIG and gasless MIG wire, meaning you can easily run mild steel, stainless steel & flux-cored MIG wire.

Multi-Process Welding - This three-in-one machine, lets you perform MIG, TIG and STICK welding all on one machine. There is no need to swap between machines, saving you time and setup.

10 AMP Plug - Plug in and play. A 10 AMP power plug can be used on any domestic outlet. It’s perfect for the DIY home handyman or the professional welder looking for a machine that can be used almost anywhere.

Lightweight & Portable - Weighing just 9.8kg, the VIPER MULTI 165 is ready to go anywhere you need it.

2 Year Warranty -  UNIMIG offers warranty across Australia with four UNIMIG service centre’s in Sydney, Melbourne, Brisbane & Perth. We also have authorised service centres across Australia as well.UNIMIG’s focus is to assure the buyer is getting reliability, performance and peace of mind with a quality product.

UNIMIG also offers an additional 6 months of warranty free of charge when you register your product online via the UNIMIG website.

PACKAGE CONTENTS

• VIPER MULTI 165 MIG/TIG/STICK Welder
• 3m SB15 MIG Torch
• 3m Twist Lock Electrode Holder
• 300 Amp Earth Clamp & Lead
• Argon Flowmeter
• 2m Gas Hose Complete with fittings
• Operating Manual

MACHINE SPECIFICATIONS

• PRIMARY INPUT VOLTAGE - 240V Single Phase 
• SUPPLY PLUG - 10 AMP
• Ieff (A) - 10.0
• RATED OUTPUT - 30A/15.5V - 165A/22.3V
• NO LOAD VOLTAGE (V) - 64
• PROTECTION CLASS - IP21S
• INSULATION CLASS - H
• MINIMUM GENERATOR (kVA) - 9.0
• DINSE CONNECTOR - 35/50
• STANDARD - AS/NZ60974-1
• SUITABLE MATERIAL - Mild Steel, Stainless Steel, Cast Iron, Silicon Bronze, Aluminium, Copper
• WARRANTY (Years) - 2

MIG SPECIFICATIONS

• MIG WELDING CURRENT RANGE - 30-165A
• MIG DUTY CYCLE @ 40°C - 10% @ 165A / 60% @ 68A / 100% @ 52A
• MIG WIRE SIZE RANGE - 0.6-1.0mm
• MIG WIRE SPOOL SIZE - 1kg / 5kg
• MIG WELDING THICKNESS RANGE - 1-8mm
• DRIVE ROLLER SIZE - 30/10

TIG SPECIFICATIONS

• TIG FUNCTION TYPE - DC Lift Arc
• TIG WELDING CURRENT RANGE - 20-160A
• TIG DUTY CYCLE @ 40°C - 10% @ 160A / 60% @ 65A / 100% @ 50A
• TIG WELDING THICKNESS RANGE - 1-6mm

• STICK SPECIFICATIONS

• STICK WELDING CURRENT RANGE - 20-140A
• STICK DUTY CYCLE @ 40°C - 10% @ 140A / 60% @ 58A / 100% @ 45A
• STICK ELECTRODE RANGE - 2.5-3.2mm
• STICK WELDING THICKNESS RANGE - 2-8mm

• SIZE & WEIGHT

• DIMENSIONS (mm) - 513x206x391mm
• WEIGHT (kg) - 9.8kg

MACHINE FEATURES

• WIRE DRIVE - Standard
• VRD - Yes
• WIRE INCH - Yes
• INDUCTANCE CONTROL - Yes
• THERMAL OVERLOAD PROTECTION - Yes

<p><iframe allow="accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture" allowfullscreen="" frameborder="0" height="315" src="https://www.youtube.com/watch?v=QAKrIbbul_4&t=1s" width="560"></iframe></p>