UNIMIG Razor 250 AMP SWF MIG / TIG / MMA Welder - KUMJR250SWF

The MIG250SWF is an inverter-based MIG welding machine with added MMA and DC TIG function. The machine is equipped with a separate 4 roll gear driven wire feeder and 10m interconnecting cables. The MIG function allows you to weld with both Gas and Gasless wire applications. Adjustment of Voltage & Wire Feed at the feeder makes for easy setting of welding parameters and gives the convenience of remote adjustment from the power source. Crater Current setting delivers perfect finishing of the weld, the electronic Inductance offers fine adjustment of the arc characteristic and Burn Back adjustment leaves the wire out ready for the next weld. Wire Inch and Gas Check provides set up of wire feed and gas setting without wastage of wire or gas. Added MMA welding capability delivers easy and high quality welding using electrodes, including cast Iron, stainless and low hydrogen. Connection of the 26V TIG torch provides quality lift arc DC TIG welding of steel, stainless steel and copper. 240v single phase gives great portability, providing more flexible use for site and home workshop locations. Ideal for general engineers, maintenance workshop and rural workshops.
Designed and built to our specification. Certified to – AS/NZ60974-1

Key Features
• Latest IGBT inverter technology
• MIG/MAG with Gas and Gasless wire function
• VRD (Voltage Reduction Device)
• MMA
• DC TIG welding with lift arc start
• Stepless Voltage & Wire Speed controls at wire feeder
• Variable Inductance
• Burn Back control
• 2T/4T trigger function
• Adjustable Crater Current function
• Gas Check
• Wire Inch
• Digital Volt / Amp meters
• Geared 4 roll wire feeder
• Euro style MIG torch connection
• 10m interconnecting cables
• Heavy duty trolley with tool draw
• Push Pull Ready
The UNIMIG Razorweld 250SWF MIG/TIG/MMA is packaged ready to weld and includes,
• 1 x Razor MIG 250 SWF Power Source
• 1 x SWF Wire Feeder
• 1 x SB24 4 metre MIG Torch
• 1 x 10 metre Arc Welding lead set including twist lock electrode holder & 500 Amp earth clamp
• 1 x 10 metre Interconnecting cables
• 1 x MIG Trolley
• 1 x UNIMIG Twin Gauge Argon Regulator
• 1 x 2 metre Gas Hose with connections
• 1 x Instruction Manual

SPECIFICATIONS

• Part NumberKUMJR250SWF
• Primary Input Voltage240V 1 Phase
• Rated Input Power KVA10.8 KVA
• ieff AMPS26.6A MIG / 28.0A MMA
• Rated Output MIG30A/15.5V - 250A/26.5V
• Rated Output MMA10A/20.4V - 250A/30.0V
• Welding Current Range10 - 250 Amps
• Duty Cycle 40 Deg C - MIG35% @ 250 Amps
• Duty Cycle 40 Deg C - MMA35% @ 225 Amps
• Dimensions (mm)630 x 235 x 420mm
• Weight Power Source (Kgs)40.6
• Weight Wire Feeder (Kgs)14
• Please note this machine will have a power lead but no plug. You will have to install your own plug depending on what power you have.

Spare part numbers

• Contact tips = CTXX68 (Replace the XX with your wire size. ie: CT0968 is for 0.9mm wire)
• Tip Holders = TA24
• Nozzles NZCO24  (Conical Standard)
• NZCY24 (Cylindrical)
• NZTP24 (Tapered)