UNIMIG 425 SWF 400 Amps MIG Welder - Workshop Series - KUM425SWF
Part # KUM425SWF
Rated 5/5 based on 1 reviews.The UNIMIG 425 SWF is a powerful high duty cycle machine designed for medium to heavy fabrication and rural applications. Combining smooth arc characteristics with complete reliability, the UNIMIG 425 SWF is the unit to satisfy all the demands of the professional welder. Features a completely enclosed KT50 wire feed unit which helps prevent dust and moisture fouling your wire and contaminating your weld. Fitted standard with a geared four roller drive system ensuring consistent wire feed and smooth welding. It comes with fully covered 10 Metre interconnecting cables and wheels for increased maneuverability.
*Please note: Due to the size of this item, the free delivery is to the Australian major cities metropolitan areas. If you are outside of the metro area, we may contact you for a small additional freight charge*
Machine Specification:
- Part Number: KUM425SWF
- Wire Drive: Four Geared
- Thermal Overload Protection: Over Temperature Warning
- Primary Input Voltage: 415V Three Phase
- Supply Plug: No plug supplied (32 AMP Recommended)
- Rated Input Power (kVA): 20.0
- Rated Output: 30 Voltage Steps, 16-32.5V
- Protection Class: IP21
- Insulation Class: I
- Minimum Generator (kVA): 24.0
- Dinse Connector: 35/50
- Standard: AS/NZ60974-1
- Suitable Material: Mild Steel, Aluminium, Stainless Steel
- Push pull compatible
- Spool gun compatible
- Please note: For push pull and Spool gun compatibility, modification required by UNIMIG at time of order. This is an extra cost. (approximately $900). This does not include the gun
- Spool gun / Push pull gun required is 48v drive
MIG Specification:
- Mig Welding Current Range: 40-400 AMPS
- Mig Duty Cycle @ 40°C: 60% @ 400A
- Mig Wire Size Range: 0.6-1.2mm
- Mig Wire Spool Size: 5kg/15kg
- Mig Welding Thickness Range: 2-30mm
- Drive Roller Size: 40/32 (x2)
Dimensions:
- Dimensions (mm): 1270 x 940 x 600mm
- Weight (kg): 182kg
- SWF Interlocking Cable Length (m): 10m
The UNIMIG Workshop 425 SWF is packaged ready to weld and includes:
- 1 x WORKSHOP 390 SWF MIG Welder
- 1 x KT50 SWF Unit
- 1 x 10m interconnecting cables
- 1 x 4m SB36 MIG Torch
- 1 x 400 Amp Earth Clamp & Lead
- 1 x Twin Gauge Argon Regulator
- 1 x 2m Gas Hose Complete with fittings
- 1 x Operating Manual
** Product comes with a nationally recognised 3 year warranty through any UNIMIG Dealer **
(KUM425SWF)
SKU | KUM425SWF |
Brand | UNIMIG |
Shipping Weight | 36.0000kg |
Shipping Width | 0.330m |
Shipping Height | 0.350m |
Shipping Length | 0.750m |
Unit Of Measure | ea |
UNIMIG is pleased to offer a 3-year warranty on all WORKSHOP Machines*.
UNIMIG offers warranty across Australia with four UNIMIG service centre’s in Sydney, Melbourne, Brisbane & Perth. We also have authorised service centres across Australia as well. UNIMIG’s focus is to assure the buyer is getting reliability, performance and peace of mind with a quality product.
UNIMIG also offers an additional 6 months warranty free of charge when you register your product online via the UNIMIG website.
*Please note warranty only applies to the power source only
Great Product
By: Daniel alnold on 13 December 2021This has been a great addition to add for my workshop. Very good standard and still lasting to this day
(5)